Current Manitou Group Machines Forklift Trucks

2024 Manitou Group Forklift Trucks M 50-4 ST5

2024 Manitou Group Forklift Trucks M 50-4 ST5

Swipe to View More

  • Year 2024
  • Make Manitou Group
  • Model Forklift Trucks
  • Engine Name: M 50-4 ST5 | model: TCD 2,9
Shop Manitou Group Pre-Owned
Product Details Specifications Photos
2024 Manitou Group Forklift Trucks M 50-4 ST5

2024 Manitou Group Forklift Trucks M 50-4 ST5

  • Year 2024
  • Manufacturer Manitou Group
  • Model Name Forklift Trucks
  • Trim Name M 50-4 ST5
  • Generic Type (Primary) Pneumatic
  • Engine Manufacturer Deutz
  • Engine Name: M 50-4 ST5 | model: TCD 2,9
  • Engine Power 55 kW
  • Rated Engine Speed 2300 rpm
  • Cylinder Liners 4 - 178 in³

2024 Manitou Group Forklift Trucks M 50-4 ST5

The M 50-4 rough-terrain forklift is designed for activities on difficult terrain or with obstacles. With 4 drive wheels and a ground clearance of 43 cm, this truck offers good manoeuvrability in all circumstances. To allow you to adapt to every ground context, you benefit from a choice of tires to optimize your productivity. Accessible from both sides, the suspended cab offers a spacious driving position with ergonomic controls. The high driving position offers a 360° panoramic vision for enhanced safety of the operator and his environment.

Engine

Engine Manufacturer Deutz
Engine Name: M 50-4 ST5 | model: TCD 2,9
Engine Power 55 kW
Rated Engine Speed 2300 rpm
Cylinder Liners 4 - 178 in³

Fuel System

Fuel Type Diesel

Drivetrain

Drive Control Electric

Brakes

Brake System Type Service: Hydraulic

Wheels & Tires

Front Wheel Type: Pneumatic | 18-22,5 MPT-06 | Number of wheels: 2 | gauge: 64 in
Rear Wheel Type: Pneumatic | 340/80 R18 XMCL | Number of wheels: 2 | gauge: 69 in
Wheels Number of drive wheels: 4

Operational

Operating Conditions Operator type: Sitting | Drawbar pull (Laden): 11000 daN
Operating Speed Travel speed (laden / unladen): 6 mi/h / 14 mi/h | Lifting speed (laden / unladen): 1 ft/s / 1 ft/s | Lowering speed (laden / unladen): 2 ft/s / 1 ft/s

Performance

Noise Level Sound level at the driver's ear according to DIN 12 053: 78 dB

Hydraulics

Maximum Pressure Working hydraulic pressure for attachments: 3336 PSI
Oil Filter flow rate for attachments: 97 l/min

Dimensions

Dimensions Load centre of gravity: 24 in | Load distance, centre of drive axle to fork: 30 in | Tilt of Mast Forward (deg) / Backward (deg): 15 / 15 | Forks section: 2 in
Wheelbase 83 in
Height of overhead guard (cabin): 98 in
Seat Height Seat height/stand height: 57 in
Overall Length 195 in
Width Forks: 6 in | Fork carriage width: 66 in | Aisle width for 1000 x 1200 pallet widthways: 268 in | Aisle width for 800 x 1200 pallet lengthways: 268 in
Length Forks: 47 in | to face of forks: 148 in
Ground Clearance below mast: 12 in | at centre of wheelbase: 17 in
Turning Radius 183 in
Overall Height of low overhead guard (Buggie version): 98 in
Overall Width 82 in

Capacities

Cargo Capacity Max: 11023 lb
Axle Capacity, Front laden: 25397 lb | Unladen: 7242 lb
Axle Capacity, Rear laden: 3979 lb | Unladen: 11111 lb

Weights

Weight Service: 18353 lb

Features

Fork Fork carriage ISO 2328 (class/form) A/B: FEM 4A

Product Photography

Warning WARNING: Operating, servicing and maintaining a passenger vehicle, an off-highway motor vehicle or a recreational marine vessel can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or vessel in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle or vessel. For more information go to https://www.p65warnings.ca.gov/products/passenger-vehicle and https://www.p65warnings.ca.gov/products/marine.