Current Manitou Group Machines Forklift Trucks

2024 Manitou Group Forklift Trucks M 40-4 ST5

2024 Manitou Group Forklift Trucks M 40-4 ST5

Swipe to View More

  • Year 2024
  • Make Manitou Group
  • Model Forklift Trucks
  • Engine Name: M 40-4 ST5 | model: TCD 2,9
Shop Manitou Group Pre-Owned
Product Details Specifications Photos
2024 Manitou Group Forklift Trucks M 40-4 ST5

2024 Manitou Group Forklift Trucks M 40-4 ST5

  • Year 2024
  • Manufacturer Manitou Group
  • Model Name Forklift Trucks
  • Trim Name M 40-4 ST5
  • Generic Type (Primary) Pneumatic
  • Engine Manufacturer Deutz
  • Engine Name: M 40-4 ST5 | model: TCD 2,9
  • Engine Power 55 kW
  • Rated Engine Speed 2300 rpm
  • Cylinder Liners 4 - 178 in³

2024 Manitou Group Forklift Trucks M 40-4 ST5

The M 40-4 is a rough-terrain forklift with 4-wheel drive. The ground clearance and crossing capacity offer performance and stability on all types of ground and even with long loads. Thanks to the varied choice of tires adapted to each situation, your versatility is enhanced. This rough-terrain forklift truck has a 74 hp engine and a lifting capacity of 4000 kg. For simplified maintenance, the hood offers wide access to the filtration components, gauges and engine. The masts, a true Manitou know-how, are designed to guarantee robustness over time even in extreme conditions of use.

Engine

Engine Manufacturer Deutz
Engine Name: M 40-4 ST5 | model: TCD 2,9
Engine Power 55 kW
Rated Engine Speed 2300 rpm
Cylinder Liners 4 - 178 in³

Fuel System

Fuel Type Diesel

Drivetrain

Drive Control Electric

Brakes

Brake System Type Service: Hydraulic

Wheels & Tires

Front Wheel Type: Pneumatic | 18-22,5 MPT-06 | Number of wheels: 2 | gauge: 64 in
Rear Wheel Type: Pneumatic | 340/80 R18 XMCL | Number of wheels: 2 | gauge: 69 in
Wheels Number of drive wheels: 4

Operational

Operating Conditions Operator type: Sitting | Drawbar pull (Laden / Unladen): 11000 daN / 6600 daN
Operating Speed Travel speed (laden / unladen): 6 mi/h / 14 mi/h | Lifting speed (laden / unladen): 1 ft/s / 1 ft/s | Lowering speed (laden / unladen): 2 ft/s / 1 ft/s

Performance

Noise Level Sound level at the driver's ear according to DIN 12 053: 76 dB

Hydraulics

Maximum Pressure Working hydraulic pressure for attachments: 3046 PSI
Oil Filter flow rate for attachments: 97 l/min

Dimensions

Dimensions Load centre of gravity: 20 in | Load distance, centre of drive axle to fork: 30 in | Tilt of Mast Forward (deg) / Backward (deg): 15 / 15 | Forks section: 2 in
Wheelbase 83 in
Height of overhead guard (cabin): 98 in
Seat Height Seat height/stand height: 57 in
Overall Length 191 in
Width Forks: 6 in | Fork carriage width: 66 in | Aisle width for 1000 x 1200 pallet widthways: 265 in | Aisle width for 800 x 1200 pallet lengthways: 265 in
Length Forks: 47 in | to face of forks: 144 in
Ground Clearance below mast: 12 in | at centre of wheelbase: 17 in
Turning Radius 180 in
Overall Height of low overhead guard (Buggie version): 98 in
Overall Width 82 in

Capacities

Cargo Capacity Max: 8818 lb
Axle Capacity, Front laden: 19864 lb | Unladen: 5787 lb
Axle Capacity, Rear laden: 4310 lb | Unladen: 9568 lb

Weights

Weight Service: 15355 lb

Features

Fork Fork carriage ISO 2328 (class/form) A/B: FEM 3A

Product Photography

Warning WARNING: Operating, servicing and maintaining a passenger vehicle, an off-highway motor vehicle or a recreational marine vessel can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or vessel in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle or vessel. For more information go to https://www.p65warnings.ca.gov/products/passenger-vehicle and https://www.p65warnings.ca.gov/products/marine.