Current Manitou Group Machines Construction Telehandlers

2024 Manitou Group Construction Telehandlers MT 420 H

2024 Manitou Group Construction Telehandlers MT 420 H

Swipe to View More

  • Year 2024
  • Make Manitou Group
  • Model Construction Telehandlers
  • Engine norm: Stage V | Model: 2607-CR-E5
Shop Manitou Group Pre-Owned
Product Details Specifications Photos
2024 Manitou Group Construction Telehandlers MT 420 H

2024 Manitou Group Construction Telehandlers MT 420 H

  • Year 2024
  • Manufacturer Manitou Group
  • Model Name Construction Telehandlers
  • Trim Name MT 420 H
  • Generic Type (Primary) General
  • Engine Manufacturer Kubota
  • Engine norm: Stage V | Model: 2607-CR-E5
  • Cylinder Liners 4 - 160 in³
  • Engine Power 57 Hp / 42 kW
  • Engine Torque, Maximum 174 Nm @ 1600 rpm

2024 Manitou Group Construction Telehandlers MT 420 H

The MT 420 H super-compact telehandler is the smallest in the MT range. Ideal for construction and renovation, its exceptional compactness allows access through narrow entrances as well as confined spaces. Its turning radius and 3 steering modes (4WS/2WS/Crab) provide excellent maneuverability. The MT 420 H has a capacity of 4,400 lbs (2,000 kg) at 14 ft. 3 in. (4.3) m, giving it a high performance load chart. The 56 hp (42 kW) engine and 2-speed hydrostatic transmission has the power to reach 15.5 mph (25 km/h). Another advantage is the simultaneous movements of the lift and extend functions that further increase productivity.

Engine

Engine Manufacturer Kubota
Engine norm: Stage V | Model: 2607-CR-E5
Cylinder Liners 4 - 160 in³
Engine Power 57 Hp / 42 kW
Engine Torque, Maximum 174 Nm @ 1600 rpm

Drivetrain

Steering 2 wheel steer, 4 wheel steer, Crab mode
Transmission Type: Hydrostatic | Max. travel speed: 15 mi/h
Gears Number of gears (forward / reverse): 2 / 2
Drive Control JSM

Brakes

Parking Brake Automatic negative brake
Brake System Type Service: Disk brake on the cadran shaft

Wheels & Tires

Tires, Rear Specification Type: Pneumatic | Camso SKS-532 - 12 - 16.5-12PR | Drive wheels: 2
Tires, Front Specification Type: Pneumatic | Camso SKS-532 - 12 - 16.5-12PR | Drive wheels: 2

Operational

Operating Conditions Breakout force with bucket: 1886 daN | Lifting: 5 s | Lowering: 3.50 s | Extension: 4.80 s | Retraction: 3 s | Crowd: 3.30 s | Dump: 2.70 s | Drawbar pull (Laden): 2850 daN | Vibration on hands/arms: < 2.50 m/s²

Performance

Noise Level Noise at driving position (LpA): 76 dB | Noise to environment (LwA): 104 dB

Hydraulics

Pump Type Gear pump
Hydraulic Flow 77.40 l/min
Maximum Pressure 3408 PSI

Lights and Safety

Safety Features Safety cab homologation: Standard EN 15000 / Cabin ROPS - FOPS Level 1

Dimensions

Dimensions Max. outreach: 8 ft 8 in | Tilt-down angle 116 ° | Tilt-up angle 12 ° | Forks section: 2 in
Lift Height Max: 14 ft 3 in
Overall Length to carriage: 11 ft 11 in
Ground Clearance 9 in
Wheelbase 7 ft
Length to face of forks: 27 ft 6 in | Forks: 47 in
Overall Width 4 ft 11 in | cab: 2 ft 7 in
Overall Height 6 ft 6 in
Turning Radius External turning radius (over tyres): 9 ft 9 in
Width Forks: 5 in

Capacities

Cargo Capacity Max: 4409 lb
Oil capacity Engine oil: 3 US gal | Hydraulic oil: 18 US gal
Fuel Capacity 16 US gal

Weights

Weight Unladen weight (with forks): 9237 lb

Product Photography

Warning WARNING: Operating, servicing and maintaining a passenger vehicle, an off-highway motor vehicle or a recreational marine vessel can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or vessel in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle or vessel. For more information go to https://www.p65warnings.ca.gov/products/passenger-vehicle and https://www.p65warnings.ca.gov/products/marine.